Holemaker Uni Shank Tinite (Tin) Cutter
.
Regular price
$61.65 NZD
inc. GST
- High Speed Steel Annular Cutter AT1225 -HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 12MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1325 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 13MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1425 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 14MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1525 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 15MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1625 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 16MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1725 -HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 17MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1825 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 18MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1925 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 19MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2025 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 20MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2125 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 21MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2225 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 22MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2325 -HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 23MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2425 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 24MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2525 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 25MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2625 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 26MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2725 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 27MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2825 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 28MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2925 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 29MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT3025 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 30MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT3125 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 31MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT3225 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 32MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- Holemaker Uni Shank Tinite (Tin) Cutter 33mm X 25mm
- Holemaker Uni Shank Tinite (Tin) Cutter 34mm X 25mm
- Holemaker Uni Shank Tinite (Tin) Cutter 35mm X 25mm
- High Speed Steel Annular Cutter AT3625 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 36MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- Holemaker Uni Shank Tinite (Tin) Cutter 37mm X 25mm
- High Speed Steel Annular Cutter AT3825 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 38MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- Holemaker Uni Shank Tinite (Tin) Cutter 39mm X 25mm
- High Speed Steel Annular Cutter AT4025 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 40MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- Holemaker Uni Shank Tinite (Tin) Cutter 41mm X 25mm
- High Speed Steel Annular Cutter AT4225 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 42MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- Holemaker Uni Shank Tinite (Tin) Cutter 43mm X 25mm
- High Speed Steel Annular Cutter AT4425 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 44MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT4525 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 45MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- Holemaker Uni Shank Tinite (Tin) Cutter 46mm X 25mm
- Holemaker Uni Shank Tinite (Tin) Cutter 47mm X 25mm
- High Speed Steel Annular Cutter AT4825 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 48MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT4925 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 49MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT5025 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 50MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT5125 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 51MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT5225 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 52MM X 25MM
- 25mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1250 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 12MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1350 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 13MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1450 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 14MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1550 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 15MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1650 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 16MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1750 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 17MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1850 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 18MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT1950 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 19MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2050 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 20MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2150 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 21MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2250 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 22MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2350 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 23MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2450 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 24MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2550 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 25MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2650 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 26MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2750 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 27MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2850 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 28MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT2950 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 29MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT3050 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 30MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT3150 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 31MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT3250 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 32MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- Holemaker Uni Shank Tinite (Tin) Cutter 33mm X 50mm
- Holemaker Uni Shank Tinite (Tin) Cutter 34mm X 50mm
- Holemaker Uni Shank Tinite (Tin) Cutter 35mm X 50mm
- High Speed Steel Annular Cutter AT3650 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 36MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- Holemaker Uni Shank Tinite (Tin) Cutter 37mm X 50mm
- High Speed Steel Annular Cutter AT3850 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 38MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- Holemaker Uni Shank Tinite (Tin) Cutter 39mm X 50mm
- High Speed Steel Annular Cutter AT4050 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 40MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- Holemaker Uni Shank Tinite (Tin) Cutter 41mm X 50mm
- High Speed Steel Annular Cutter AT4250 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 42MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- Holemaker Uni Shank Tinite (Tin) Cutter 43mm X 50mm
- High Speed Steel Annular Cutter AT4450 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 44MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT4550 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 45MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- Holemaker Uni Shank Tinite (Tin) Cutter 46mm X 50mm
- Holemaker Uni Shank Tinite (Tin) Cutter 47mm X 50mm
- High Speed Steel Annular Cutter AT4850 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 48MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT4950 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 49MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT5050 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 50MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT5150 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 51MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT5250 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 52MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- High Speed Steel Annular Cutter AT5550 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 55MM X 50MM
- 50mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
- Holemaker Uni Shank Tinite (Tin) Cutter 59mm X 50mm
- The Titanium Nitride coating significantly increases the tool life by providing the following benefits:. - Increased surface hardness to 85HRC. - Ceramic surface reducing friction by up to 30%. - Especially resistant to cold welding. - Suitable for cutting a wide range of materials
- M2AL HIGH SPEED STEEL MATERIAL
- M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC designed for increased endurance of the cutting edge and tool life
- STEP HARDENED PROCESS
- This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage than standard high speed steel cutters
- MULTI-CUT GEOMETRY
- Provides smooth and fast cutting with decreased chatter
- This also increases the cutters ability to remove swarf away from the cut and helps to enhance centring
- FULLY GROUND WITH INTERNAL RELIEF
- This feature allows Holemaker cutters to produce reamed quality burr-free holes and also helps to reduce torque and horsepower requirements
- UNIVERSAL SHANK
- 19.05mm (¾”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines
- Pilot Pin To Suit - SP16004
- High Speed Steel Annular Cutter AT2775 - HOLEMAKER UNI SHANK TINITE (TiN) CUTTER 27MM X 75MM
- 75mm DEPTH M2AL HIGH SPEED STEEL MATERIAL M2AL High Speed Steel is a high alloy material with a hardness of up to 67.5 HRC. TITANIUM NITRIDE COATING The Titanium Nitride coating increases tool life by providing the following benefits:
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4”) Universal Shank with 2 flat sections to suit most magnetic base drilling machines.
Dispatched within 24-48 hours.
Free shipping on $300+ orders. Exclusions may apply.
14-Day Return Policy.
Buy Now Pay Later available at checkout
Got questions? Feel free to get in touch.
The Holemaker Uni Shank Tinite (Tin) Cutter range covers 87 models: AT1225, AT1325, AT1425, AT1525, AT1625, AT1725, AT1825, AT1925, AT2025, AT2125, AT2225, AT2325, AT2425, AT2525, AT2625, AT2725, AT2825, AT2925, AT3025, AT3125, AT3225, AT3325, AT3425, AT3525, AT3625, AT3725, AT3825, AT3925, AT4025, AT4125, AT4225, AT4325, AT4425, AT4525, AT4625, AT4725, AT4825, AT4925, AT5025, AT5125, AT5225, AT1250, AT1350, AT1450, AT1550, AT16.550, AT1650, AT1750, AT1850, AT1950, AT2050, AT2150, AT2250, AT2350, AT2450, AT2550, AT2650, AT2750, AT2850, AT2950, AT3050, AT3150, AT3250, AT3350, AT3450, AT3550, AT3650, AT3750, AT3850, AT3950, AT4050, AT4150, AT4250, AT4350, AT4450, AT4550, AT4650, AT4750, AT4850, AT4950, AT5050, AT5150, AT5250, AT5550, AT5950, AT6050, AT2775. The table below shows how the models differ. Select your model from the options above.
About this range
- Increased surface hardness to 85HRC
- Ceramic surface reducing friction by up to 30%
- Especially resistant to cold welding STEP HARDENED PROCESS Cutter is manufactured with extremely hard tooth tips for increased cutter performance while maintaining a softer body which is less susceptible to breakage. MULTI-CUT GEOMETRY Provides smooth and fast cutting with decreased chatter. This also increases the cutters ability to remove swarf away from the cut and helps to enhance centering. FULLY GROUND WITH INTERNAL RELIEF This feature allows Holemaker cutters to produce reamed quality burr-free holes. UNIVERSAL SHANK 19.05mm (3/4in) Universal Shank with 2 flat sections to suit most magnetic base drilling machines
Models in this range
| Model | Option |
|---|---|
| AT1225 | 12mmx25mm |
| AT1325 | 13mmx25mm |
| AT1425 | 14mmx25mm |
| AT1525 | 15mmx25mm |
| AT1625 | 16mmx25mm |
| AT1725 | 17mmx25mm |
| AT1825 | 18mmx25mm |
| AT1925 | 19mmx25mm |
| AT2025 | 20mmx25mm |
| AT2125 | 21mmx25mm |
| AT2225 | 22mmx25mm |
| AT2325 | 23mmx25mm |
| AT2425 | 24mmx25mm |
| AT2525 | 25mmx25mm |
| AT2625 | 26mmx25mm |
| AT2725 | 27mmx25mm |
| AT2825 | 28mmx25mm |
| AT2925 | 29mmx25mm |
| AT3025 | 30mmx25mm |
| AT3125 | 31mmx25mm |
| AT3225 | 32mmx25mm |
| AT3325 | 33mmx25mm |
| AT3425 | 34mmx25mm |
| AT3525 | 35mmx25mm |
| AT3625 | 36mmx25mm |
| AT3725 | 37mmx25mm |
| AT3825 | 38mmx25mm |
| AT3925 | 39mmx25mm |
| AT4025 | 40mmx25mm |
| AT4125 | 41mmx25mm |
| AT4225 | 42mmx25mm |
| AT4325 | 43mmx25mm |
| AT4425 | 44mmx25mm |
| AT4525 | 45mmx25mm |
| AT4625 | 46mmx25mm |
| AT4725 | 47mmx25mm |
| AT4825 | 48mmx25mm |
| AT4925 | 49mmx25mm |
| AT5025 | 50mmx25mm |
| AT5125 | 51mmx25mm |
| AT5225 | 52mmx25mm |
| AT1250 | 12mmx50mm |
| AT1350 | 13mmx50mm |
| AT1450 | 14mmx50mm |
| AT1550 | 15mmx50mm |
| AT16.550 | 16.5mmx50mm |
| AT1650 | 16mmx50mm |
| AT1750 | 17mmx50mm |
| AT1850 | 18mmx50mm |
| AT1950 | 19mmx50mm |
| AT2050 | 20mmx50mm |
| AT2150 | 21mmx50mm |
| AT2250 | 22mmx50mm |
| AT2350 | 23mmx50mm |
| AT2450 | 24mmx50mm |
| AT2550 | 25mmx50mm |
| AT2650 | 26mmx50mm |
| AT2750 | 27mmx50mm |
| AT2850 | 28mmx50mm |
| AT2950 | 29mmx50mm |
| AT3050 | 30mmx50mm |
| AT3150 | 31mmx50mm |
| AT3250 | 32mmx50mm |
| AT3350 | 33mmx50mm |
| AT3450 | 34mmx50mm |
| AT3550 | 35mmx50mm |
| AT3650 | 36mmx50mm |
| AT3750 | 37mmx50mm |
| AT3850 | 38mmx50mm |
| AT3950 | 39mmx50mm |
| AT4050 | 40mmx50mm |
| AT4150 | 41mmx50mm |
| AT4250 | 42mmx50mm |
| AT4350 | 43mmx50mm |
| AT4450 | 44mmx50mm |
| AT4550 | 45mmx50mm |
| AT4650 | 46mmx50mm |
| AT4750 | 47mmx50mm |
| AT4850 | 48mmx50mm |
| AT4950 | 49mmx50mm |
| AT5050 | 50mmx50mm |
| AT5150 | 51mmx50mm |
| AT5250 | 52mmx50mm |
| AT5550 | 55mmx50mm |
| AT5950 | 59mmx50mm |
| AT6050 | 60mmx50mm |
| AT2775 | 27mmx75mm |
Our online store is open 24/7 and we ship Monday through Friday, excluding public holidays.
Orders received for products without shipping restrictions will generally ship the same business day when received before 3:00 p.m.
Some products may take longer or there may be additonal fees due to items being heavy, large or are requesting delivery to a remote rural location. You may be contacted after placing your order if this applies.
We cannot deliver to PO boxes, Stewart Island or the Chatham Islands.
