3m 8883 Aerosol Underseal Rubber 560g
Buy Now Pay Later available at checkout
3M™ Rubberized Undercoating produces a textured finish which resists chipping, abrasion, exterior rusting and weathering. Provides one-coat build-up with no dripping, running or sagging.
Directions for Use
1. Remove all rust scale, oil and grease from surfaces to be coated. Surface must be clean and dry.
2. May be applied to bare or primed metal.
3. Note: If applying to composite plastic (SMC/FRP) as a sound deadening material, sand the composite plastic surface with a medium grade abrasive prior to applying under coating, this will increase adhesion.
4. Shake can for at least 60 seconds after agitator ball moves freely. To assure that the entire contents will be dispensed, always have the dot on the can rim facing downward.
5. Hold the can 10 - 12 inches from the surface and apply a uniform coat. Allow product to dry 3 - 5 minutes, then apply a second coat. For hard to reach or small areas, use the snorkel tube with spray head.
6. After use clear valve by inverting can and spray until free of material.
7. Note: Car trunks and interior areas require special attention to remove the vapors.
Our online store is open 24/7 and we ship Monday through Friday, excluding public holidays.
Orders received for products without shipping restrictions will generally ship the same business day when received before 3:00 p.m.
Some products may take longer or there may be additonal fees due to items being heavy, large or are requesting delivery to a remote rural location. You may be contacted after placing your order if this applies.
We cannot deliver to PO boxes, Stewart Island or the Chatham Islands.
