{"product_id":"heatshield-thermaflect-tape-1-1-2-x-1m","title":"Heatshield Thermaflect Tape 1-1\/2\" X 1m","description":"\u003cp\u003eHeat shield tape reflects up to 90 percent of radiant heat away from wires, lines, cables and hoses, protecting them from ambient heat, and it withstands 1100 F continuous radiant heat (requires minimum of 1 inch airspace) and 500 F of direct contact. Thermaflect Tape™ insulates components without requiring disassembly for installation, or it can be used to hold other thermal-barrier products in place. Thermaflect heat shield tape can also be used as a quick solution to radiant heat-damage problems - use it at a track to control a hot spot. Durable cloth construction makes it last longer than similar products. Thermaflect Tape™ is easy to cut and install, thanks to our high-temperature self-adhesive backing that sticks to any clean surface. Thermaflect Tape™ is a heatshield product that is a must-have for your shop or racetrack toolbox.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003e- Capable of reducing up to 90% of radiant heat\u003c\/p\u003e\n\n\u003cp\u003e- Adhesive backing sticks to almost any clean surface\u003c\/p\u003e\n\n\u003cp\u003e- Helps shield fuel lines, brake lines, wire looms, and more from radiant heat\u003c\/p\u003e\n\n\n\u003cp\u003eInstallation Tips:\u003c\/p\u003e\n\n\u003cp\u003e- Cuts easily with heavy scissors or utility knife\u003c\/p\u003e\n\n\u003cp\u003e- Thermaflect Tape is intended to be applied on the cold side of panel or component, i.e. it is not intended to direct contact with heat source\u003c\/p\u003e\n\n\u003cp\u003ePanel or component surface temperature should be at least 65°F, sticking onto anything colder may not allow adhesive to set up properly.\u003cbr\u003e\nDegrease and clean surface any residual dirt, grease, or chemicals, use carburetor spray or other cleaner\/degreaser.\u003cbr\u003e\nWe strongly recommend rubbing the surface with a pre-paint cleaner or isopropyl alcohol (or other non-residue cleaner) after cleaning and degreasing.\u003cbr\u003e\nCarefully peel the adhesive backing off the Thermaflect Tape stick and go!\u003c\/p\u003e","brand":"Formula","offers":[{"title":"Default Title","offer_id":40178279022682,"sku":"340001","price":69.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/7229\/8842\/products\/340001_1.jpg?v=1666520167","url":"https:\/\/engineerscollective.co.nz\/products\/heatshield-thermaflect-tape-1-1-2-x-1m","provider":"Engineers Collective","version":"1.0","type":"link"}