{"product_id":"conrod-kit-hot-rods-yamaha-wr250f-yz250f-yz250fx","title":"Conrod Kit Hot Rods Yamaha Wr250f Yz250f Yz250fx","description":"\u003cp\u003eOne single connecting rod is where it all began for Hot Rods and now, with almost two decades of experience, continuously improved designs and an ever expanding line of applications; Hot Rods has continued to be, not only “The Original” aftermarket replacement rod, but the best aftermarket replacement rod.\u003c\/p\u003e\n\n\u003cp\u003eAll of our rods are created from 8620 case hardened steel. But, in addition to that, our rods also undergo a special forging process which helps to improve grain flow as well as dimensional consistency — and that means a rod of uncompromising strength.\u003c\/p\u003e\n\n\u003cp\u003eTo improve fatigue durability, all Hot Rods rods are shot peened. This process, utilizing a stainless steel shot, helps to remove stress risers and creates smoothly blended radiuses. In the end, a Hot Rods connecting rod is one of the most durable rods that enthusiasts and engine builders can buy.\u003c\/p\u003e\n\n\u003cp\u003eHowever, a rod is only as good as its supporting parts and that’s why a Hot Rods kit features only the most advanced and durable bearings. Case hardened and silver coated, the bearings are just as tough and reliable as the rods.\u003c\/p\u003e\n\n\u003cp\u003eEven Hot Rods crank pins are subjected to the same rigorous standards as the rods and bearings. Each crank pin is created from hot-rolled ASTM 4115 steel and case-hardened to a level of 58–62 Rc\u003c\/p\u003e\n\n\u003cp\u003e-   Double-honed bearing surfaces to provide a reliable, high RPM rod\u003c\/p\u003e\n\n\u003cp\u003e-   Double-drilled small ends for increased wrist pin lubrication\u003c\/p\u003e\n\n\u003cp\u003e-   Bronze bushings in the small end of all four-stroke rods to maximize durability under high-loads and prevent galling\u003cbr\u003e\n-   Specially designed vent slots in the large end of all two-stroke rods for improved lubrication\u003cbr\u003e\n-   Side scalloping on large end to minimize high RPM rod distortion\u003c\/p\u003e\n\n\u003cp\u003eYAMAHA\u003c\/p\u003e \n\n\u003cp\u003eWR250F   15-21\u003cbr\u003e\nYZ250F     14-21\u003cbr\u003e\nYZ250FX   15-19\u003c\/p\u003e","brand":"Formula","offers":[{"title":"Default Title","offer_id":45076339786009,"sku":"8717","price":279.45,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0047\/7229\/8842\/files\/8717.jpg?v=1682476898","url":"https:\/\/engineerscollective.co.nz\/products\/conrod-kit-hot-rods-yamaha-wr250f-yz250f-yz250fx","provider":"Engineers Collective","version":"1.0","type":"link"}